High build epoxy undercoat polyamide coating with good resistant properties and formulated with high quality inert pigment. This product is also available in micaceous ironoxide (MIO) version. It has good resistance to fresh and salt water and low water permeability.
features
High build epoxy
Can be applied directly to stainless steel with suitable topcoat
Volume Solids (Based on ASTM - D2697) -80% + 2%
Typical Dry Film Thickness - 125 Microns
Wet Film Thickness - 160 Microns
VOC (Test Method -USEPA 24) - <185 gm/ Ltr
Application procedure
Airless Spray
Conventional Spray
Brush
Roller
Additional Information
Designed Use: Suitable as Intermediate / undercoat for upto C5 Environment as per ISO 12944 Part 2 along with suitable topcoat
Thinner/ Cleaning Solvent: Solvalux 7-45
Packaging: 20 Ltrs
Shelf Life: 24 months from date of manufacture
Other information: Common with all epoxies this product will chalk or discolor on exposure to sunlight. Dry heat resistance upto 80 �C. May also be applied between 100 and 150 Microns DFT.
Colour: Off White, Grey, MIO Grey
POPULAR SYSTEM
One coat of primer Epilux / Zincanode followed by one coat of Epilux 219 @ 100 /150 microns dft per coat followed by suitable topcoat Please consult Berger Representative for recommending suitable paint system
Contact Us
Berger Paints Emirates Ltd Co (LLC)P.O. Box 27098, Abu Dhabi, UAE.
High build epoxy
Can be applied directly to stainless steel with suitable topcoat
