Mud cracking is presence of large cracks which may cause coating to curl at the cracks.
Causes:
Solution:
Wrinkling is furrows and ridges in the coatings – usually at random.
Causes:
Solution:
Fingering is when you see uneven spray fan resulting in alternate thick and thin lines of paint in the spray fan and on the substrate.
Causes:
Solution:
Excessive Spray Fog is a large amount of spray appearing like a heavy mist as the product is being sprayed.
Causes:
Solution:
Staining is a patch, usually dark coloured, that appears in the film sometime after application.
Causes:
Solution:
Cobwebbing is the formation of filaments of partially dried paint particles during spray application.
Causes:
Solution:
Overspray is a very rough surface appearance that can actually be dust on the coating.
Causes:
Solution:
Pin-holding Cissing are small visible holes caused by the wet coating recessing from an area of the surface usually randomly located.
Causes:
Solution:
Uneven Gloss is a patchy appearance on the surface giving uneven sheen levels.
Causes:
Solution:
Orange Peel is an uneven finish giving an unclear reflected image from the surface.
Causes:
Solution:
Sagging (runs) is excessive flow of paint on vertical surface resulting in streaks and thick lower edges in the paint film.
Causes:
Solution:
Brush Marks are lines of uneven film build that remain in a film after it has dried.
Causes:
Solution:
