Epimastic 5500 M

High Build Epoxy Mastic Primer Cum Finish

Material Safety Data Sheet Product Data Sheet

Product Finder

Looking for a product? We’ll help you find the right one basis your requirement.

search close

search *Select minimum one filter

A self priming surface tolerant high build epoxy coating containing zinc phosphate and micaceous iron oxide that provides a tough barrier coating for steel. Can be topcoated with conventional and two pack coatings.

features

A high build coating for blasted steel and single coat maintenance system

General maintenance coating for offshore installation, structural steel, etc.

Volume Solids (Based on ASTM - D2697) - 68% + 2%
Typical Dry Film Thickness - 125 Microns
Wet Film Thickness - 185 Microns
VOC (Test Method -USEPA 24) - 272 gm/ Ltr

Application procedure

Airless Spray
Conventional Spray
Brush
Roller

Additional Information

Designed Use: Suitable as primer for upto C5 Environment as per ISO 12944 Part 2 along with suitable intermediate and topcoats.
Thinner/ Cleaning Solvent: Solvalux 7-45
Packaging: 5 Ltrs & 20 Ltrs
Shelf Life: 12 months from date of manufacture.
Other information: Common with all epoxies this product will chalk or discolor on exposure to sunlight. Dry heat resistance upto 100� C. May also be applied between 100 and 175 Microns DFT.
Colour: Range of Grey Colours (with MIO Particles)

POPULAR SYSTEM

One or two coats of Epimastic 5500@ 100/ 175 microns dft per coat directly to blasted steel or over primer Zincanode with suitable topcoat. Please consult Berger Representative for recommending suitable paint system

Contact Us

Berger Paints Emirates Ltd Co (LLC)

Queries
Feedback

You can connect with us for inquiries, quote or feedback through any of the below methods below:

Please enter your name.
Please enter your email ID.
Please enter your phone number.
Please select your city.
Please select your designation.
Please select your query.
Please select a type of feedback.
Please enter your comments.
submit